NOVLARC-472
- Customer pickup,
- Courier
- In detail
- Release formPowder
Product Description:
NOVLARC-472 is a two (2) component 100% solids solvent-free, novolac epoxy high build coating that is
designed to protect steel and concrete surfaces subjected to severe corrosive chemicals attack, erosion and
abrasion.
NOVLARC-472 novolac epoxy coating can be applied by brush, roller or spray equipments at a thickness of 200-250
microns (0.20-0.25 mm) per coat. The cured composite provides outstanding chemical and abrasion resistance
with a high solid gloss surface finish.
NOVLARC-472 novolac epoxy coating has excellent surface tolerance characteristics and can be directly applied onto steel,
concrete and other surfaces, where sandblasting is not possible. NOVLARC-472 coat ing offer tenaciously
strong bond to metals, steel, concrete, and to almost all dry surfaces.
Features:
• chemical resistance
Outstanding chemical resistance to concentrated acids including 98% sulfuric acid, 37% hydrochloric acid, 85% phosphoric,
20% acetic and chromic acids, 25% hydrofluoric acid, 50% caustic, wet and dry chlorine, chlorates, bleaches, fluorides and fluoride
salts, aliphatic and aromatic solvents, crude oil, gasoline, kerosene, naphtha, JP-4, JP-5 and other refined petroleum
products, Fertilizer solutions (such as urea, ammonium nitrate, calcium nitrate and nitrophosphate solutions etc.), salt
solutions, waste water and hot corrosive gaseous mixtures etc.
• Excellent wear and abrasion resistance
• 100% solids, Solvent-free, zero VOC's
• Excellent high temperature resistance
• Tenaciously high bond strength to steel, concrete,
bricks, fiberglass and other surfaces
• High solid and gloss surface finish • Fast Installation, reduce the costly downtime
• Increase the maintenance intervals and reduce the
annual maintenance cost
• Meet the surface preparation requirement of
SSPC SP-11 and SSPC SP-3, where sandblasting
is not possible.
Packaging:
Pre-measured units.
1 kg, 2.50 kgs, 3.75 kgs and 12.50 kgs